Power Press Specialists: TMA Engineering

• Power Presses
  • Service - Spares - Repairs
  • Second Hand Presses
  • Second Hand Ancillary Equipment
  • Roll Feeds & Ancillary Equipment
  • Guarding
  • Inspection & Maintenance
  • News
• Railway Maintenance Support & Loco's
  • Specialist Parts
  • Specialist Fabrications
  • Locomotive Engineering
  • New Locomotives
  • Current Projects
• General Machining & Fabrication
  • Small Batch & One Off's
  • Fabrication
  • Aluminium Welding
  • Plant Capacity

Second Hand Ancillary Equipment

We have a good selection of Uncoilers, Straighteners, Roll Feeds, Air Feeds, Die Cushions etc. in stock.

Some equipment has been completely overhauled and checked over and others are in the process of being overhauled.  If you would like more information or you would like to view a particular piece of equipment please contact us.

If you cannot see the item you require please contact us & we may be able to find what you are looking for.

Un-coilers
EWB SINGLE HEAD UNCOILER
Powered, 12" - 16" i/d, 31" o/d, 4" wide. (TMA 26501 E)

BHP TWIN HEAD UNCOILER
Unpowered, drag brakes, 10" - 16" i/d, 38" - 44" o/d, 10" wide. (TMA 26501 G)

 

Straighteners
BHP STRAIGHTENER
152mm wide x 2mm thick, 0-30m/min, variable speed. (TMA 26502 D)

BHP STRAIGHTENER
250mm wide x 1.2mm thick, variable speed 0-160 feet/min. (TMA 26502 E)

BHP STRAIGHTENER
600mm wide x 1.6mm thick, variable speed 0-30 m/min. (TMA 26502)

CLARKS STRAIGHTENER
450mm wide x 2mm thick. (TMA 26502 A)

CLARKS STRAIGHTENER
600mm wide x 1.6mm thick. (TMA 26502 B)

 

Combined Uncoilers / Straighteners
BHP CRADLE TYPE
16" wide x 0.125" thick, variable speed 0-90 ft/min, 3200 lbs coil weight. (TMA 26502 K)

HUMPHRIES CRADLE TYPE
16" wide x 0.080" thick, variable speed 21-84 ft/min, 2000 lbs coil weight, max 40" o/dia. (TMA 26502 L)

BALCONI TWIN HEAD UNCOILER/STRAIGHTENER
Mounted on a common base, 250mm wide x 2mm thick, speed 60 m/min. (TMA 26502 H)

 

BHP TWIN HEAD UNCOILER/STRAIGHTENER
Mounted on a common base, 250mm wide x 3.2mm thick, 300-510mm mandrel range, max coil weight 1 ton, snubber arm, speed 0-30 m/min. (TMA 26502 M)

 

Feeds

NEW CWP SMXSE06 'Special Edition' SERVO ROLL FEED
6" wide, 0.187" thick, great little feed
Pneumatic roll lift, pilot release, fully programmable (TMA 34176)

 

NEW TMA SERVO ROLL FEED
420mm wide, 0-2mm or 2-4mm thick
Pneumatic roll lift, pilot release, end of strip sensor (TMA 9200)

 

SMV ELECTRONIC SERVO ROLL FEED
Type MV 500-200, 1993
200mm wide, 2.5 mm thick at max width, max. material cross-sec area 500sq.mm
Pneumatic roll lift, pilot release, end of strip sensor (TMA 26503 F)

POWAIR AIR FEED
600mm wide x 2mm thick, 200mm stroke (TMA 26503 B)

POWAIR AIR FEED
12" wide x 1/8" thick, 12" stroke (TMA 26503 C)

POWAIR AIR FEED
6 " wide x 1/8" thick, 6 " stroke, S/No. 606M1345HDS (TMA 26503 D)

 

POWAIR AIR FEED
6 " wide x 1/8" thick, 6 " stroke, S/No. 606M1346HDS (TMA 26503 E)

 

MECHANICAL FEED
EASI FEED (TMA 25046)

 

Miscellaneous
HYDRAULIC COPY ATTACHMENT
Can be fitted to any lathe to reproduce profiles, including hydraulic power pack

 

Die Cushions
WORSON - DDC 123X (1408777) - 3" stroke X 8 tons force at 80psi

WORSON - DDC 146X (1457880) - 6" stroke X 10.5 tons force at 80psi

WORSON - 3DC 186 (1423278) - 6" stroke X 27 tons force at 80psi - (2 0ff)

WORSON - DDC 106X (1359375) - 6" stroke X 5.5 tons force at 80psi - (2 off)

Mistakes can be made, all specifications and sizes are not guaranteed to be correct.
It is the customers responsibility to ensure the equipment they are purchasing is correct for their purpose.